Aviano Air Base   Right Corner Banner
Join the Air Force

Photos > Media Gallery
Selected : People

12 Result(s) Found

Show 12 24 48
 
Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force load crew members from the 31st Aircraft Maintenance Squadron install an M61A2 gun into an F-16 Fighting Falcon, May 20, 2015, at Aviano Air Base, Italy These Airmen inspect and reinstall F-16 Fighting Falcon parts every 18 months. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force load crew members from the 31st Aircraft Maintenance Squadron install an M61A2 gun into an F-16 Fighting Falcon, May 20, 2015, at Aviano Air Base, Italy. Armament Airmen from the 31st Munitions Squadron and 31st AMXS are responsible for loading weapons onto aircraft, performing function checks and repairing munitions parts. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force Senior Airman Thomas Johnson, 31st Aircraft Maintenance Squadron load crew member, installs an M61A2 gun into an F-16 Fighting Falcon, May 20, 2015, at Aviano Air Base, Italy. These Airmen inspect and reinstall F-16 Fighting Falcon parts every 18 months. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force armament technicians from the 31st Munitions Squadron inspect weapons from an F-16 Fighting Falcon, May 20, 2015, at Aviano Air Base, Italy. Armament Airmen from the 31st Munitions Squadron and 31st AMXS are responsible for loading weapons onto aircraft, performing function checks and repairing munitions parts. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force Airman 1st Class Brandon Isaac, 31st Munitions Squadron armament technician, repairs an F-16 Fighting Falcon’s launcher detent assembly attachment, May 20, 2015, at Aviano Air Base, Italy. These Airmen inspect and reinstall F-16 Fighting Falcon parts every 18 months. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Armament Airmen inspect, repair Aviano’s ammunitionsArmament Airmen inspect, repair Aviano’s ammunitions
Armament Airmen inspect, repair Aviano’s ammunitions

U.S. Air Force Senior Airman Derek Thayer, 31st Munitions Squadron armament technician, inspects an F-16 Fighting Falcon’s ammunition conveyor interface unit, May 20, 2015, at Aviano Air Base, Italy. The interface unit grabs bullets from an ammunition drum and loads them into a gun barrel. (U.S. Air Force photo by Senior Airman Matthew Lotz/Released)
Armament Airmen ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

Upper and lower bearings of landing gear sit on absorbent cloth before a specialized washer cleans them, May 18, 2015, at Aviano Air Base, Italy. The bearings are inspected after being washed for further damage. Each part must be removed in sequence, washed and inspected to ensure the landing gear’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

U.S. Air Force Airman 1st Class Steven Jakubowski, 31st Maintenance Squadron hydraulic section apprentice, and Tech. Sgt. Tabor Gluth, 31st MXS hydraulic section NCOIC, remove the metering pin out of a landing gear strut, May 18, 2015, at Aviano Air Base, Italy. Each part must be removed in sequence, washed and inspected to ensure the landing gear’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

U.S. Air Force Airman 1st Class Steven Jakubowski, 31st Maintenance Squadron hydraulic section apprentice, inspects damage on a retaining ring, May 18, 2015, at Aviano Air Base, Italy. Each part must be removed in sequence, washed and inspected to ensure the landing gear’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

U.S. Air Force Staff Sgt. Kristopher Voak, 31st Maintenance Squadron hydraulic section craftsman, removes retaining rings, May 18, 2015, at Aviano Air Base, Italy. Each part must be removed in sequence, washed and inspected to ensure the landing gear’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

U.S. Airmen with the 31st Maintenance Squadron hydraulic section prepare to disassemble a landing gear, May 18, 2015, at Aviano Air Base, Italy. Each part must be removed in sequence, washed and inspected to ensure the landing gear’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

Small hangar with a big missionSmall hangar with a big mission
Small hangar with a big mission

U.S. Airmen from the 31st Maintenance Squadron hydraulic section separate two main parts of a landing gear strut, May 18, 2015, at Aviano Air Base, Italy. Each part must be removed in sequence, washed and inspected to ensure the strut’s integrity. (U.S. Air Force photo by Airman 1st Class Cary Smith/Released)
Small hangar ...


Download Full Image
E-mail a friend
Posted: 5/21/2015

    

 Inside Aviano

ima cornerSearch

ima cornerCategories
All Photos
   Aircraft
   Aviano AB
   Aviano's Finest
   Mission Spotlight
   News
   Operation Odyssey Dawn
   People
      Awards/Recognition
      Off duty
      On the Job
      Sports
   Travel

Site Map      Contact Us     Questions     USA.gov     Security and Privacy notice     E-publishing  
Suicide Prevention    SAPR   IG   EEO   Accessibility/Section 508   No FEAR Act