Aviano Air Base

Sort By

Category

Show Advanced Options

Clear Filters |

Full Throttle

An F-16 Fighting Falcon assigned to the 555th Fighter Squadron takes off at Aviano Air Base, Italy, July 15, 2020. The 555th FS “Triple Nickel” has been stationed at Aviano AB since the 31st Fighter Wing’s activation on April 1, 1994. Other home stations for the 555th FS include various U.S. locations, England, France, Belgium, and Thailand. (U.S. Air Force photo by Staff Sgt. Kelsey Tucker)

Details Download

Aviano CATM Receives New Weapon

An Airman with the 31st Fighter Wing loads an M18 SIG Sauer Modular Handgun System magazine during a Combat Arms Training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. Aviano received M18 handguns last April and began training at Aviano on June 1, 2020. The modular design of the M18 handgun provides improved ergonomics, target acquisition, reliability and durability in comparison to the M9 Beretta, which the Air Force has used for 30 years. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Tech. Sgt. Jordan Corsonwalp, 31st Security Forces Squadron flight sergeant (left), and Tech. Sgt. Jeremiah Strickland, 31st SFS noncommissioned officer in charge of electronic security systems (right), shoot at a target during a Combat Arms Training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. The M18 is a 9mm handgun and a lightweight version of the M17 SIG Sauer. The M18 handgun can be customized with a small, medium or large handgrip. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Airmen with the 31st Fighter Wing participate in a Combat Arms Training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. The Air Force recently started suppling M18 handguns to its security forces units. The new M18 handgun model is set to completely replace the M9 Berretta which has been used since the 1980s as the primary handgun for U.S. Air Force security forces. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Five magazines for an M18 SIG Sauer Modular Handgun System sit on a shelf at Aviano Air Base, Italy, July 14, 2020. The Air Force Security Forces Center, in partnership with the Air Force Small Arms Program Office, began fielding the M18 handgun to security forces units. This transition was part of the Reconstitute Defender Initiative which aims to modernize weapon systems and increase warfighter lethality. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Airmen with the 31st Fighter Wing shoot at targets during a Combat Arms training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. The Air Force Security Forces Center, in partnership with the Air Force Small Arms Program Office, began fielding the M18 handgun to security forces units. This transition was part of the Reconstitute Defender Initiative which aims to modernize weapon systems and increase warfighter lethality. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Airman 1st Class Rhyker Wayt, with the 31st Security Forces Squadron, shoots at a target during a Combat Arms Training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. The M18 is a 9mm handgun and a lightweight version of the M17 SIG Sauer. The M18 handgun can be customized with a small, medium or large handgrip. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

Aviano CATM Receives New Weapon

Airmen with the 31st Fighter Wing load magazines during a Combat Arms Training and Maintenance class at Aviano Air Base, Italy, July 14, 2020. Aviano received M18 handguns last April and began training at Aviano on June 1, 2020. The modular design of the M18 handgun provides improved ergonomics, target acquisition, reliability and durability in comparison to the M9 Beretta, which was used by the Air Force for over 30 years. (U.S. Air Force photo by Airman 1st Class Thomas S. Keisler IV)

Details Download

56th HMU sets roots in Aviano

The 56th Helicopter Maintenance Unit built a new kitchen at Aviano Air Base, Italy, July 14, 2020. The 56th HMU opened a new support section, crew chief and specialist office, productions office, kitchen, full bathroom, and a locker room with showers. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

56th HMU sets roots in Aviano

The 56th HMU sets roots in Aviano July 14, 2020 at Aviano Air Base, Italy.The 56th Helicopter Maintenance Unit’s renovated a hangar with new flightline equipment at Aviano Air Base, Italy, July 14, 2020. The 56th HMU renovated various sections in hangar three. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

56th HMU sets roots in Aviano

U.S. Air Force Staff Sgt. Edward T. Sims, 31st Aircraft Maintenance Squadron, 56th Helicopter Maintenance Unit support craftsman, opens an automated tool control system at Aviano Air Base, Italy, July 14, 2020. The 56th HMU renovated one of the hangars with new equipment. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

56th HMU sets roots in Aviano

Jolly green foot prints represent the 56th Helicopter Maintenance Unit at Aviano Air Base, Italy, July 14, 2020. The 56th HMU renovated various section in hangar three. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

56th HMU sets roots in Aviano

U.S. Air Force Staff Sgt. Edward T. Sims (left), support craftsman, U.S. Air Force Tech. Sgt. Kenneth Hopkins (center), support section chief, and U.S. Air Force Senior Airman Jeremiah Reynolds (right), support journeyman, work in the new support section of hangar three at Aviano Air Base, Italy, July 14, 2020. Sims, Hopkins, and Reynolds are assigned to the 31st Aircraft Maintenance Squadron, 56th Helicopter Maintenance Unit. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

56th HMU sets roots in Aviano

The 56th Helicopter Maintenance Unit built a new production room at Aviano Air Base, Italy, July 14, 2020. The 56th HMU opened a new support section, crew chief and specialist offices, productions office, kitchen, full bathroom, and a locker room with showers. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download

31st CS keeps Wyvern Nation connected during COVID-19

Senior Airman Mary Graham (left), Airman 1st Class Jordan Grant (middle), and Senior Airman Tiarra Chavis (right), resolve troubleshooting tickets at Aviano Air Base, Italy, July 9, 2020. The Airmen are 31st Communications Squadron client systems technicians who overcame unique challenges to support the 31st Fighter Wing. (U.S. Air Force photo by Staff Sgt. Heidi Goodsell)

Details Download

31st CS keeps Wyvern Nation connected during COVID-19

Airman 1st Class Sinéad Mcgorman, 31st Communications Squadron client systems technician, talks to a client to resolve a troubleshooting ticket at Aviano Air Base, Italy, July 9, 2020. The 31st CS provides support to over 9,000 individuals. (U.S. Air Force photo by Staff Sgt. Heidi Goodsell)

Details Download

31st CS keeps Wyvern Nation connected during COVID-19

A 31st Communications Squadron logo is displayed at Aviano Air Base, Italy, July 9, 2020. The squadron adapted quickly to unique challenges during the COVID-19 crisis. (U.S. Air Force photo by Staff Sgt. Heidi Goodsell)

Details Download

31st CS keeps Wyvern Nation connected during COVID-19

James Johnson and Airman 1st Class Savannah Coon, 31st Communications Squadron client systems technicians, reimage computers at Aviano Air Base, Italy, July 9, 2020. Reimaging computers was an important factor during the COVID-19 crisis. (U.S. Air Force photo by Staff Sgt. Heidi Goodsell)

Details Download

31st CS keeps Wyvern Nation connected during COVID-19

A 31st Communications Squadron patch is displayed at Aviano Air Base, Italy, July 9, 2020. The squadron adapted quickly to unique challenges during the COVID-19 crisis. (U.S. Air Force photo by Staff Sgt. Heidi Goodsell)

Details Download

31st Fighter Wing conducts Operation Porcupine 2020

U.S. Air Force Airman 1st Class Declan Ward, 31st Security Force Squadron monitoring facility operator hides in the grass during Operation Porcupine, June 30, 2020 at Osoppo, Italy. The 31st SFS maintains installation force protection during peacetime and wartime operations within eight separate base areas. (U.S. Air Force photo by Airman 1st Class Ericka A. Woolever)

Details Download